Honeywell VCZMH6000U, 3/4″ IT, Three-way diverter valve

– without actuator
The VC series balanced hydronic valves by Honeywell with On/Off function are used in both domestic and small commercial heating and cooling applications. They are made up of an actuator, a valve and an cartridge assembly. The valves can be installed in central heating and /or cooling systems as mixing or diverting valves. Both versions can be used to control individual fan coil, baseboard radiators or convector applications. Depending on the selected model, they can be controlled by a low or line voltage controller, such as a room thermostat, aquastat or flow switch with NO contact or change-over contact. The VC-valves have been designed to take advantage of sinusoidal valve actuator travel and therefore operate silently and without water hammer. Through internal logic the actuator only takes power while driving the valve to the commanded position.

Datasheet